size: 1140x50cm 4 strips of 285 cm color: pink white material: woven wallpaper paper Other: Each roll is custom printed, so there may be a slight color difference compared to a sample. Instructions: 1. Preparation/ Make sure the wall is smooth, clean, dry and evenly colored. Wallpaper with ± 18 to 20 degrees. 2. Wall smear with glue/ Use Perfax for non-woven wallpaper 3. The lanes are numbered,surely respect this order. 4. First track stick/ roll off the job on the wall and cut off the excess material. Paste the first job. Cut the bottom off on the plinth along a metal ruler. Run a spatula wallpaper from the inside out to eliminate blow. Do not rub with hands or cloth, otherwise you touch the surface. 5. Next jobs paste/ Start again with each cut off the excess material. Lane 2 and 4 should be reversed. Paste the jobs very closely at other jobs. Run a spatula wallpaper from the inside out to eliminate blow. Do not rub with hands or cloth. 6. Wallpaper over sockets /Paste the wallpaper on the outlets and switches, pull firmly on the perimeter and cut the middle out. 7. Dry/ Give your walls the time to dry out. Once this is done, you will no wet spots seen. Any glue stains can be removed immediately with lukewarm water by blotting with a sponge. Press the seams once with a roller.